- For Permanent Crimp Connections to PEX Tubing Fittings
- 3/8″, 1/2″ & 3/4″ Sizes all in one tool!
- Simple to use, NO Adjustments!, Inexpensive too!
- Uses the less expensive, more heavy duty standard Crimp Rings preferred by Professionals
- Fits in tight locations – and in your tool box or pouch pocket
Product Description
Just slip tool over crimp ring on fitting and squeeze with your Vise Grips. Designed and tested to meet ASTM 1807-F specs. for crimping PEX tubing to fittings…. More >>
PEX Pocket Crimper – Combination 3/4, 1/2, 3/8
Related posts:
- Zurn Multi-Head Crimp Tool Kit
- Complete Range for Plumbing Tools at Your Click
- Oil Rubbed Bronze Bathroom Accessory 4 Piece Combination Pack
- Broan 678 Ventilation Fan and Light Combination, 50 CFM and 2.5-Sones
- IMPERIAL 24609 SLEEVE SWAGGING TOOL
- Zurn Pex QQP2GX Plug Low Led 3/8″ Reviews
- Ridgid 23332 Flaring Tool
- IMPERIAL 90010 INVERTED FLARE TUBE FITTINGS 1/8
- PVC To Copper Pipe -Help Guide – Plumbing supply Products org
- TC-40 Powered Plastic Pipe & Tubing Cutter
admin 
Posted in 
Tags: 
I only needed to do a few 3/4″ crimps so I thought this would be a good tool. Not so. I could not get this tool to close with large channel-locks or vise grips. Maybe a ratcheting tool would work. I bought the special purpose 3/4″ tool at a home improvement store for twice as much but it is soooo much easier to use.
Rating: 1 / 5
My hands can barely grip my steering wheel and I have nearly bruised palms from the amount of pressure it takes to make these things crimp. I’m on the stronger side of folks, and this was without a doubt the hardest part of the entire home remodel project I’m doing. These things are nearly impossible to use, and fall apart when you unlock your vice grips, so you have to realign them each time you squeeze. Most crimps require AT LEAST 4 squeezes, so count on doing at least 4 times as much work as with a normal crimping tool. I want a refund. Save yourself the time and buy a tool for twice as much to save yourself the time and painful hands.
Rating: 1 / 5
I borrowed this crimper from a relative who had not yet used the tool. I attempted approximately 10 crimps on 1/2″ pipe and was only successful on the ones where I could use the ground as a base to push the pliers against. On the crimps where the pipe was already installed in the wall or ceiling I was not able to apply enough pressure to crimp the ring tight enough to get the go guage to slide on. Fortunately I am not out any money and had a friend who has the real crimpers. I used Channel Lock pliers, not Vise Grips as recommended however I don’t think it would have made a difference. Unless you are a very strong person and don’t mind squuezing until you can’t see straight I would not recommend this tool.
Rating: 2 / 5
I have been using this crimper for a few days and it has been working great. I could not justify buying one for $100+ so thought I would give this a try. Do not hesitate to try this product.
Rating: 5 / 5
Company A-1, Shipping was fast and the case and go nogo guage a plus thank you.
Rating: 5 / 5